Delta Corp Sdn Bhd · Shah Alam, Malaysia
GCCM
Geosynthetic Cementitious
Composite Mat
A flexible, concrete-impregnated mat that hardens on hydration to form a thin, durable and waterproof concrete layer. Ideal for slope protection, erosion control and canal lining across Malaysia — simply unroll and add water.
⚙ Quick Specifications
What Is GCCM?
A Geosynthetic Cementitious Composite Mat (GCCM) is a factory-assembled geosynthetic composite in which a dry cementitious mixture is encapsulated within one or more layers of synthetic fabric. When hydrated with water, the cement undergoes a standard hydration reaction and hardens into a fibre-reinforced concrete shell.
Unlike conventional concrete — which demands batching plants, formwork and specialist equipment — GCCM arrives on-site as a compact roll and installs with minimal labour and zero heavy machinery. This makes it particularly well-suited to challenging Malaysian terrain such as steep hillside slopes, remote riverbanks and confined drainage channels.
GCCM vs Shotcrete: GCCM installs up to 10× faster than conventional shotcrete or cast-in-place concrete, with no mixing plant, no formwork and no specialist operators required.
3-Step Installation
-
Prepare the Surface
Clear vegetation, compact loose soil and remove debris. No concrete base, formwork or sub-base preparation required.
-
Unroll & Position
Roll out the GCCM across the surface. Cut to shape with basic hand tools. Overlap adjacent sheets by ≥ 100 mm and secure with ground anchors or pins.
-
Hydrate with Water
Spray with any water — fresh, brackish or sea water. The mat begins hardening in as little as 2 hours and reaches full structural strength within 24 hours. No further action needed.
Key Benefits
Proven in over 100 countries across civil, mining, oil & gas and agricultural sectors, GCCM delivers a compelling combination of speed, durability and cost-efficiency.
10× Faster Installation
A 3-person team installs 200 m² per hour — dramatically reducing labour costs and project timelines versus conventional concrete.
Fully Waterproof
Hydraulic conductivity below 1×10⁻¹¹ m/s once cured — ideal for canal lining, ponds and secondary containment bunds.
Fire Resistant
The cured concrete layer is non-combustible, suitable for petrochemical sites, industrial bunds and remote installations.
Low Carbon & Eco-Friendly
Uses up to 95% less material than cast-in-place concrete. Minimal waste, lower transport footprint, no heavy on-site machinery.
Conforms to Complex Terrain
Flexible before hydration — adapts to irregular slopes, contoured surfaces and confined spaces inaccessible to conventional concrete.
Minimal Equipment
No concrete mixer, pump truck or formwork. Only basic hand tools and a water source — reducing project complexity and mobilisation cost.
High Compressive Strength
≥ 40 MPa at 28 days with 5× greater abrasion resistance than standard OPC concrete.
Long Service Life
Rated for 50–120 years with minimal maintenance, providing outstanding long-term value over conventional erosion control solutions.
GCCM Applications in Malaysia
Malaysia's tropical climate, monsoon seasons and active infrastructure development create urgent and wide-ranging demand for GCCM across multiple sectors.
Slope & Embankment Protection
Highway cut slopes, hill development sites and railway embankments at risk from monsoon erosion.
Channel & Canal Lining
JPS drainage channels, irrigation canals and monsoon drains requiring durable, watertight lining.
Culvert Rehabilitation
Cost-effective lining of ageing culverts as an alternative to full replacement or bitumen spraying.
Industrial Bund Lining
Secondary containment for palm oil mills, petrochemical plants and tank farms.
Mining & Tailings
Tailings dam lining, retention pond containment and site drainage for mining operations.
Agriculture & Plantation
Water retention ponds, irrigation channels and erosion control for oil palm estates.
Road & Highway Works
Ditch lining, outfall protection and slope stabilisation along major road corridors.
Coastal & Riverbank Protection
Shoreline armouring and riverbank stabilisation in high-flow or tidal environments.
Technical Specifications
Typical performance values for standard GCCM grades. Contact Delta Corp for project-specific datasheets and custom sizing.
| Property | CC5 (5 mm) | CC8 (8 mm) | CC13 (13 mm) | Test Method |
|---|---|---|---|---|
| Nominal Thickness | 5 mm | 8 mm | 13 mm | ASTM D5199 |
| Mass per Unit Area | ~7 kg/m² | ~10 kg/m² | ~19 kg/m² | ASTM D5261 |
| Compressive Strength (28-day) | ≥ 40 MPa | ≥ 40 MPa | ≥ 40 MPa | ASTM C39 |
| Flexural Strength | ≥ 5 MPa | ≥ 6 MPa | ≥ 8 MPa | ASTM C78 |
| Hydraulic Conductivity | < 1×10⁻¹¹ m/s (all grades) | ASTM D5084 | ||
| Set Time (initial) | 2 – 4 hours | — | ||
| Full Cure Time | 24 hours | — | ||
| Roll Width | 0.5 m – 1.0 m (std.) / Wide rolls on request | — | ||
| Water for Hydration | Fresh, Brackish or Sea Water | — | ||
| Standard Compliance | ASTM D8364 — Type I / II / III | — | ||
| UV / Weathering Resistance | Excellent — no degradation | ASTM G154 | ||
| Abrasion Resistance | 5× greater than standard OPC concrete | — | ||
Why GCCM Is Essential for Malaysia
Malaysia's geography, climate and rapid infrastructure growth combine to create persistent, high-value demand for fast and reliable erosion control and slope protection solutions.
Monsoon Rainfall & Landslide Risk
Annual rainfall exceeding 2,000 mm accelerates slope erosion and triggers landslides. GCCM provides rapid, permanent protection for exposed cut slopes.
Massive Infrastructure Pipeline
Roads, highways, MRT/LRT extensions and rural projects all require fast, cost-effective slope and channel protection without heavy equipment mobilisation.
Oil Palm & Agricultural Estates
Millions of hectares of plantation land require drainage channels, retention ponds and erosion control solutions well-suited to GCCM deployment.
Ageing Drainage Infrastructure
JPS culverts, monsoon drains and irrigation channels throughout Malaysia require cost-effective rehabilitation without full reconstruction.
Mining & Heavy Industry
Active mining sites and industrial facilities need robust secondary containment and tailings management resistant to chemical exposure.
Remote & Inaccessible Sites
Many Malaysian project sites are unreachable by concrete mixer trucks. GCCM's portability and simplicity — only water required — solves this completely.
Frequently Asked Questions
GCCM Supplier in Malaysia — Delta Corp Sdn Bhd
Delta Corp Sdn Bhd is a trusted industrial and construction materials supplier based in Shah Alam, Selangor, serving clients across Peninsular Malaysia and East Malaysia since 2006. Building on our expertise in geosynthetic and specialty construction materials, we now supply GCCM (Geosynthetic Cementitious Composite Mat) — also commercially known as Concrete Canvas or cement blanket — to civil contractors, infrastructure developers, mining operators and plantation companies throughout Malaysia.
Our GCCM products conform to ASTM D8364, the international standard specification for geosynthetic cementitious composite mats. Available in 5 mm, 8 mm and 13 mm thicknesses in both portable batched rolls and large bulk rolls, our supply suits projects of all scales — from small culvert lining works to large highway slope protection and industrial bund lining.
We supply to clients in Selangor, Kuala Lumpur, Johor, Penang, Perak, Sabah, Sarawak and all states across Malaysia. Our technical team advises on product selection, quantities, installation methodology and compliance with local project specifications.
To enquire about GCCM pricing, availability or technical support in Malaysia, contact Delta Corp at enquiry@deltacorp.com.my, call or WhatsApp +60122941815, or visit us at Worldwide Business Centre, Shah Alam, Selangor.